主管：中华人民共和国应急管理部
主办：应急管理部天津消防研究所
ISSN 1009-0029  CN 12-1311/TU
消防科学与技术

消防科学与技术 ›› 2020, Vol. 39 ›› Issue (11): 1569-1572.

• • 上一篇    下一篇

低压气泡雾化的实验及数值模拟研究

樊恩玺，陈健   

  1. 沈阳航空航天大学安全工程学院，辽宁沈阳110136
  • 出版日期:2020-11-15 发布日期:2020-11-15
  • 作者简介:樊恩玺（1995-），男，山东菏泽人，沈阳航空航天大学安全工程学院硕士研究生，主要从事细水雾灭火研究，辽宁省沈阳市沈北新区道义南大街37 号，110136。

Experimental and numerical simulation of low pressure bubble atomization

FAN En-xi，CHEN Jian   

  1. School of Safety Engineering, Shenyang Aerospace University,Liaoning Shenyang 110136, China

  • Online:2020-11-15 Published:2020-11-15

摘要： 为了进一步研究混合腔内部流场和参数最佳组合的两相流装置，设计了6 种不同结构的两相流雾化喷嘴,并实验测定雾滴粒径、雾滴轴向速度、雾化角和雾通量等相关雾化特性参数。在实验基础上，采用Fluent 模拟软件对混合腔内部的速度流场、压力流场和气液体积分数进行模拟分析，对实验结果进行补充与验证。得到雾化特性和灭火效果兼优的最优喷嘴的工作参数为：液体工作压力0.4 MPa，液体质量流量为60.0 kg/h，气体工作压力0.6 MPa，气体质量流量为0.1 kg/h，喷孔直径0.8 mm，注气孔数32 个。

关键词: 气泡雾化, 雾化特性, 数值模拟, 喷嘴结构, 灭火效果

Abstract: In order to further study the two-phase flow device with the best combination of flow field and parameters inside the mixing chamber, six two-phase flow atomizing nozzles with different structures were designed in this paper. The relevant atomization characteristic parameters such as droplet size, droplet axial velocity, atomization angle and fog flux were experimentally determined. Based on the experiment, the velocity flow field, pressure flow field and gas-liquid volume fraction inside the mixing chamber were simulated by Fluent software, so as to supplement and verify the experimental results. The optimal working parameters of the nozzle are as follows: liquid working pressure is 0.4 MPa, liquid mass flow is 60.0 kg/h, gas working pressure is 0.6 MPa, gas mass flow is 0.1 kg/h, nozzle diameter is 0.8 mm and injection number is 32.

Key words: bubble atomizing, numerical simulation, nozzle structure, fire extinguishing effect