主管：中华人民共和国应急管理部
主办：应急管理部天津消防研究所
ISSN 1009-0029  CN 12-1311/TU
消防科学与技术

消防科学与技术 ›› 2024, Vol. 43 ›› Issue (12): 1759-1765.

• • 上一篇    下一篇

正压式消防空气呼吸器轻质Ⅲ型缠绕复合气瓶的研制

周凯1, 黄焕伟2, 林永佳1, 施樑1   

  1. （1. 应急管理部上海消防研究所，上海 200032；2. 上海天海复合气瓶有限公司，上海 201615）
  • 出版日期:2024-12-15 发布日期:2024-12-15
  • 作者简介:周 凯(1980- )，男，浙江临海人，应急管理管理部上海消防研究所副研究员，硕士，主要从事消防员个人防护技术与装备研究，上海市徐汇区中山南二路601号，200032，zhoukai@shfri.cn。
  • 基金资助:
    上海市科技计划项目（22dz1201000）

Development of lightweight type III winding composite cylinder for positive pressure firefighting air breathing apparatus

Zhou Kai1, Huang Huanwei2, Lin Yongjia1, Shi Liang1   

  1. (1. Shanghai Fire Science and Research Institute of MEM, Shanghai 200032, China;2. Shanghai Tianhai Composite Gas Cylinder Co., Ltd., Shanghai 201615, China)
  • Online:2024-12-15 Published:2024-12-15

摘要： 正压式消防空气呼吸器的整机质量过大会对消防员形成极大的体能消耗，造成实际呼吸保护时间大幅缩短，不仅严重影响消防救援作业效能，还可能为消防员的人身安全埋下重要安全隐患。本文介绍了一种正压式消防空气呼吸器用轻质Ⅲ型缠绕复合气瓶的研制过程及关键技术。通过优化气瓶结构，采用高强度新材料等方式，实现瓶体质量比同类产品降低22.3%，并且瓶体承载能力和安全性均有显著提升，可明显减轻消防员生理负担，延长呼吸器的呼吸防护时间。

关键词: 轻质, 缠绕复合气瓶, 正压式消防空气呼吸器

Abstract: The overall weight of SCBA can cause great physical exertion on firefighters, causing the actual respiratory protection time to be greatly shortened. Not only will it seriously affect the efficiency of fire and rescue operations, but it may also create important safety hazards for firefighters' personal safety. This article introduces the development process and key technologies of a lightweight type III fully wrapped composite gas cylinder for SCBA. By optimizing the structure of the cylinder and using high-strength new materials, the mass of the cylinder is reduced by 22.3% compared with similar products, and the carrying capacity and safety of the cylinder are significantly improved, which significantly reduces the physiological burden on firefighters and prolongs the breathing of the respirator.

Key words: lightweight, fully wrapped composite gas cylinders;SCBA